Dino-Power DP-X3 - Page 23

Reference
21
Quick Reference
Ref.
No.
Name
Description
A
Prime/Spray Valve
• In PRIME position directs fluid to draintube.
• In SPRAY position directs pressurized fluid to
paint hose.
• Automatically relieves system pressure in over-
pressure situations.
B
Pressure Control Knob
Increases (clockwise) and decreases
(counter-clockwise) fluid pressure in pump, hose,
and airless spray gun. To select function, align
symbol on pressure control knob with setting
indicator.
C
ON/OFF Switch
Turns sprayer ON and OFF.
D
Suction Tube
Draws fluid from paint pail into pump.
E
Drain Tube
Drains fluid in system during priming and pressure
relief.
F
Airless Spray Gun
Dispenses fluid.
G
Reversible Spray Tip
• Atomizes fluid being sprayed, forms spraypattern
and controls fluid flow according to hole size.
• Reverse position unclogs plugged tipswithout
disassembly.
H
Tip Guard
Reduces risk of fluid injection injury.
I
Gun Trigger Lock
Prevents accidental triggering of airless spray gun.
J
Gun Fluid Inlet Fitting
Threaded connection for paint hose.
K
Gun Fluid Filter
Filters fluid entering spray gun to reduce tip clogs.
L
Pump
Pumps and pressurizes fluid and delivers it to paint
hose.
M
Pump Fluid Outlet Fitting
Threaded connection for airless hose.
N
Airless Hose
Transports high-pressure fluid from pump to spray
gun.
O
Suction Filter
Prevents debris from entering pump.
P
Power Cord
Plugs into power source.
Q
Suction Tube Drip Cup
Holds the suction tube during transport to catch
drips.