EasyManua.ls Logo

Dino-Power DP-X3 - Before You Spray

Dino-Power DP-X3
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
Review Warnings for Important Safety Information
Important! Read carefully and practice good safety habits.
Review Manuals and Watch Videos
Always carefully read manuals and watch videos before doing the spraying jobs.
Not approved for use in explosive atmospheres or hazardous locations.
For portable airless spraying of architectural paints and coatings.
FIRE AND EXPLOSION HAZARD
DP-X3/DP-X6 Models:
Use only non-flammable or water-based/oil-based materials, or non-flammable paint thinners. Do
not use materials having flash points lower than 100° F (38° C). This includes, but is not limited to,
acetone, xylene, toluene, or naphtha. For more information about your material, request Safety
Data Sheet (SDS) from the supplier.
Spraying flammable or combustible materials in a factory or fixed location must comply with NFPA
33 and OSHA 1910.94(c) requirements in the USA and with all similar local regulations in other
countries.
Before You Spray

Related product manuals