End a call
Using the handset
Hand up the handset or press the Cancel soft key .
Using the speakerphone
Press or the Cancel soft key.
Using the Headset
Press the Cancel soft key.
Call Mute and Un- mute
Press to mute the microphone during a call.
Press again to un-mute the call.
Call Hold and Resume
Place a call on hold
If there is only one call on hold, press or the Resume soft key .
To resume a call
Press or the Hold soft key during an active call.
Call Transfer
(1) Press the Trans soft key during an active call. The call is placed on hold.
(2)Enter the number you want to transfer to.
(3) Press .
Call Forward
Redial
Press the History soft key,then press or to select the desired entry,
and then press the Send soft key.
If there is more than one call on hold, press or to select the desired
call, and then press or the Resume soft key .
(1) Press the Menu soft key when the phone is idle and then select Features
Call Forward.
(2) Select the desired forward type:
Always Forward: Incoming calls are forwarded unconditionally.
Busy Forward: Incoming calls are forwarded when the phone is busy.
No Answer Forward: Incoming calls are forwarded if not answered after a
period of time.
(4) Press the Save soft key to accept the change.
Speed Dial
To configure a speed dial key:
Enter the number you want the call to be forwarded to. For No Answer
Forward, set a value in the Timeout field for determining the duration of the
ringing time before thecall is forwarded.
(3)
To Next Page
Loading...