Basic Operation
14
Dial *114# to query the telephone number of a FXS port;
Restart the device:
1
2
Dial *111# to restart the device;
Click "system->Reboot" menu to perform reboot.
More Details
15
This document only provides instructions for quick installation and basic
configuration. For detailed configuration and parameter explanations, Please
refer to User Manual or ask for technical support.
IP COMMUNICATION SOLUTIONS
Shenzhen Dinstar Co., Ltd.
Web: www.dinstar.com
1
Under normal running status, if users press RST button for 3 to 6 seconds,
the username/password of the device will restore to default
username/password, and the network configuration will be restored to
factory settings (e.g., the IP address of GE1 will be restored to
192.168.11.1) and the HTTPS/SSH ports restored to the default ports,
which does not affect other configurations.
RST Button (Suitable for UC200 Pro)
2
Under normal running status, pressing RST button 6 to 12 seconds and will
restore all configuration data to factory default data and reboot the device.
3
When the device is power off, pressing and holding RST button and RST
auxiliary buttons simultaneously for more than 30 seconds after it power on,
the device will clear all the configurations and restore to mini-system
management.
To Previous Page
Loading...