Diono Cambria - Booster Seat Assembly; Attaching the Backrest; Removing the Backrest

11
Booster Seat Assembly
1) Tuck fabric panel at rear of seat
exposing the mounting points.
Attaching The Backrest
2) Load backrest hooks
to seat mounting points.
3) Push down on seatback
just above hooks.
4) Rotate seatback to an
upright position while
maintaining pressure
just above the hooks.
5) Finish by tucking any
excess fabric up and
under the fabric
of the backrest.
Booster Seat Assembly
Attaching the Backrest
Removing the Backrest
Follow above instructions in reverse.
EN_SP_cambria_Manual_09122017.indd 11 9/12/17 10:55 AM