Diono Radian 3QXT+ - Changing Harness Position

diono.com
35
D. CHANGING HARNESS POSITON
1. Unbuckle the chest clip and
harness buckle.
2. To loosen harness, push
down on silver lever and pull
shoulder straps forward.
3. Detach harness straps from
metal plate on back of seat.
4. Pull each harness through to
the front of the seat.
5. Re-locate each harness to the
correct slot determined. Then
push through to the back of the
seat taking care to keep each
harness strap at.
6. Re-secure the harness straps to the
metal plate. Make sure to secure
the left strap onto the metal hook
rst then secure the second strap
onto the metal hook.
2 nd
1st
2
6
FIRST SETUP