Diono Radian 3QXT+ - Lap;Shoulder Belt Installation; Lap Belt Installation

REAR-FACING
diono.com
53
INSTALLATION WITH:
1. Install detachable rear-facing base (see pg 44) and
ARP (see pg 46).
2. Place car seat rear-
facing in back seat
of the vehicle with
detachable rear-facing
base and ARP installed.
Center the car seat on the
vehicle seat. The seat bottom
and feet of the rear-facing base
should sit at on the vehicle seat
with no overhang.
LAP/SHOULDER BELT
4–50 lb (1.8–22.7 kg)
2
LAP BELT
4–50 lb (1.8–22.7 kg)