FORWARD-FACING
diono.com
59
SAFE STOP
Safe Stop is for use ONLY in forward-facing installations
with children weighing 22–40 lb (10–18 kg).
DO NOT use rear-facing. DO NOT use in booster mode.
IMPORTANT: The Safe Stop will need to be removed
once the child reaches 40 lb (18 kg).
1. Locate Safe Stop.
2. Remove harness straps from
metal plate. Detach harness from
metal plate on back of seat. Once
detached, thread both harness
straps onto the metal hook of
the Safe Stop. Connect left side
of harness rst, then follow with
the right.
3. 3. Thread bottom of Safe Stop Thread bottom of Safe Stop
onto the harness strap onto the harness strap
hook. hook. Check to ensure proper
engagement to the metal plate.
Take care to ensure harness straps
are not twisted and are clear from
any obstructions.
1
2
3
To Next Page