Diono Radian 3QXT+ - Anti-Rebound Panel (ARP)

FORWARD-FACING
diono.com
61
ANTIREBOUND PANEL ARP
NOTE: Anti rebound panel is for comfort only. It is not
required for forward-facing installs.
1. Place the ARP into the slots on
the front of the car seat until
hearing an audible "click". Pull
bars outwards to conrm lock
in place.
2. Push the buttons on the outside
hinge of the ARP in and rotate the
board down until hearing an
audible "click" at the desired
angle. Push on board to conrm
it is locked into position.
DO NOT use ARP in
rear-facing position when
installed forward-facing.
To remove, press the release buttons on the
outside of the seat and pull the ARP
out. NOTE: You may need to release
one side at a time.