Diono Radian 3QXT+ - Page 65

FORWARD-FACING
diono.com
65
5. Place car seat forward-facing in back
seat of the vehicle. Center the car
seat between the vehicle LATCH/UAS
anchors. The entire seat bottom should
sit at on the vehicle seat. If overhang
is present refer to page 62.
6. Loosely attach tether
strap. Do not tighten.
Consult your vehicle
owners manual for specic
tether anchor locations.
7. Attach LATCH/UAS connectors to
vehicle’s LATCH/UAS anchors and
listen for audible "click" to conrm
engagement. LATCH/UAS strap
should lie at and not be twisted.
Continued on the next page
5
7