EasyManua.ls Logo

Diono Radian 3QXT+ - Page 67

Diono Radian 3QXT+
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FORWARD-FACING
diono.com
67
10. Tighten the top tether strap to
remove the slack. There should
not be any extra tension on
the top tether. Do not push
on the car seat back while
tightening. Compressing the
car seat into the vehicle seat
might reslult in a top tether
that is too tight.
11. To remove LATCH/UAS strap
from vehicle use the LATCH/
UAS red release straps on the
LATCH/UAS connectors and
pull them o the anchor bars.
12. To loosen or remove the top
tether, push in on the grey
button to loosen, then unclip
the top tether.
10
11

Related product manuals