Diono Radian 3QXT+ - Lap Belt Cushion

FOWARD-FACING
72
LAP BELT CUSHION
* IMPORTANT! FOR FORWARDFACING
INSTALLATIONS USING A LAP BELT ONLY WITH NO
TOP TETHER ANCHOR AVAILABLE FROM 2265 LB
1029.5 KG. DO NOT USE REARFACING. *
*MUST USE 5TH HARNESS SLOT.*
1. Remove the center buckle pad
by pulling it carefully up and over
the buckle.
2. Unclip seat cover from seat
bottom. Lift seat cover away from
the seat bottom and remove the
buckle.
3. Place lap belt cushion on seat
bottom, and slide the buckle
through the slot in the cushion
that matches the slot position being
used on the seat.
2
1
3