www.dipgrinders.ro • office@dipgrinders.ro 7
2. INTRODUCTION: CONSERVATION OF THE HANDBOOK
The manual is intended for the machine’s user and/or maintenance technician.
The object of this manual is to provide information for the correct use of the machine
and proper maintenance, as well as to guarantee the safety of the operator.
This manual must be carefully retained, since the manufacturer accepts no responsibility
for damage to people or things, or suffered by the machine if it is used in other ways
than that describe there in or if the maintenance and safety prescriptions are not
complied with.
This manual must be always available to the user and/or maintenance technician,
who must be informed of the correct use of the machine and possible hidden risks. It
must be kept in a dry, clean place.
The information given in this manual does not replace the safety instructions and technical
data for the installation and operating directly affixed to the machine and packaging.
This manual must be considered as part of the machine and must be kept for the future
reference until it is dismantled.
If you want further information, contact your area agent or the manufacturer.
This manual reflects the state of the art at the current time and cannot be considered
inadequate merely because it is updated later on the basis of new developments.
The manufacturer also reserves the right to modify the manual without the duty of
updating earlier issues, only in exceptional cases.
If the machine is used incorrectly or in ways other than described in this manual it
will render any guarantee or manufacturer’s responsibility condition null and void; a
responsible adult should use it.
3. CONTEMPLATED USE AND WARNINGS
The coffee grinder is an appliance for grinding coffee beans.
Average operating time is 10 years.
Its long-lasting, non-toxic components are easily accessible for proper cleaning and maintenance.
The user must be an adult (must be over 18 years old). Children or unsuitable people
must not use the machine.
The user must comply with the safety regulations in force in the country of installation,
as well as with the rules dictated by common sense, and ensure that routine maintenance
is carried out regularly and correctly.
The installer, the user and the maintenance technician must inform the manufacturer of
To Next Page
Loading...