8 www.dipgrinders.ro • office@dipgrinders.ro
possible faults or wear which could affect the system’s original safety.
The installer must check that the environmental conditions are suitable, so as to
guarantee safety and hygiene for the operators and users.
The various manufacturers are responsible for the commercial components fitted to the
machine; the customer is responsible for the people authorized to use the machine.
Do not expose the machine to the sun, rain, snow, etc.
Safety Precaution
This appliance must be used only for the purpose to which it was specifically designed,
namely for grinding coffee beans. Any other use will be considered unsuitable and
therefore hazardous. The manufacturer cannot be held responsible for any possible
damage caused by unsuitable, incorrect or unreasonable use.
Basic rules:
• Do not touch the appliance with damp or wet hands.
• Do not use the appliance in bare feet.
• Although the machine is earthen, we recommend the use of a centralized life-
saving system to prevent the risk of electric shocks.
• Do not tug on the power flex or the appliance itself to disconnect the plug from
the socket.
• Do not allow the appliance to be used by children or unsuitable persons.
• Before carrying out any cleaning or maintenance, disconnect the appliance from
the electrical main network by removing the plug.
• Do not use jets of water or detergents
• In the case of a fault or malfunction of the appliance switch it off and do not
tamper with it. If it needs repairs, use only an authorized technical service center
and ask for original spare parts to be used. If you don’t do that you will affect the
appliance’s safety.
• Do not leave the appliance plugged in unnecessarily. Unplug it from the power
supply when it is not in use.
• Do not block the ventilation and heat dispersal openings and louvers and do not
introduce water or any type of liquid into them.
• If the flex is damaged it should be replaced as soon as possible
• When the appliance is working never insert spoons, forks or other utensils into
the container to extract samples or make interventions.
• Never immerse the motor base in water.
To Next Page
Loading...