7
1-800-634-7328 DirectSupply.com
Bed Attachment
1. Insert snap-in nylon bearings into sleep deck mount holes on bed frame.
4. Repeat steps 1 - 3 for the opposite rail.
3. Secure siderail to sleep deck by snapping a hair pin (located on the underside of the head or foot
sleep deck between the two siderail holes) into the groove at the end of both siderail attachment
pins. Verify all hair pins are properly seated.
2. Insert siderail attachment pins into outer and inner sleep deck mount holes, ensuring the rail is
properly located on the bed (grooves should be on the inside of the inner mount holes).
To Next Page
Loading...
