Direct Supply Panacea 3000 - Maintenance; Routine Inspection; Cleaning; Replacement Parts

9
1-800-634-7328 DirectSupply.com
Routine Inspection
1.Review“REDUCINGTHERISKOFENTRAPMENT”listedinthismanual.
2.Reviewandinspectforcompliancethe“WARNINGS”listedinthismanual.
3. Inspect all components for damage or excessive wear.
4. Visually examine all welds for cracks.
5. Inspect all bolts and fasteners (Do not over tighten bolts at pivot points).
Cleaning
Clean with a mild solution of antiseptic cleaner and warm water. Read and follow all label instructions
on the cleaning products. DO NOT STEAM OR PRESSURE WASH.
Replacement parts
Replacementpartsmaybepurchasedbycontactingcustomerserviceat1-800-634-7328.Partsare
availableforfrequentlyrequestedcomponentsasfollows:PN1500096–HardwareBag(8–E-rings;
8 – Snap-In Nylon Bearings).
Maintenance