User guide P.13
-To stop the horn from sounding if the OEM-style alarm is triggered, press the or
button, or put the system in and out of Valet Mode (page-8)
CarFinder
If configured by your installer, the Car Finder option will help you locate the vehicle by sending a
pulsating signal through the horn. To hear the signal, press and hold the or button. This
will produce a pulsating signal for the time you keep the button pressed.
IntrusionCodesviahorn
The system monitors the following:
• Doors
• Hood
• Ignition
Note: If an intrusion has occurred the HORN will sound for a maximum of 1minute.
If an intrusion has occurred and
pressed, the horn provides an intrusion code corresponding to
the type of intrusion that occurred.
1x = power interruption 4x = Doors intrusion
To Next Page
Loading...
