18
© 2009 Directed Electronics. All rights reserved.
Aux/Trunk Icon Type: sets the name to be displayed in the Text Field when the Aux/Trunk output is acti-1.
vated/de-activated
Aux 1 Timed Output: sets the output duration in 1 second intervals up to 90 seconds for Aux 12.
Aux 1 Icon Type: sets the name to be displayed in the Text Field when the Aux 1 output is activated/3.
de-activated
Aux 2 Timed Output: sets the Aux 2 “Timed” output in 1 second intervals up to 90 seconds4.
Aux 2 Icon Type: sets the name to be displayed in the Text Field when the Aux 2 output is activated/5.
de-activated
Aux 3 Timed Output: sets the Aux 3 “Timed” output in 1 second intervals up to 90 seconds6.
Aux 3 Icon Type: sets the name to be displayed in the Text Field when the Aux 3 output is activated/7.
de-activated
Aux 4 Timed Output: sets the Aux 4 “Timed” output in 1 second intervals up to 90 seconds8.
Diesel Start Delay Timer: sets the delay before engine crank in 1 second intervals up to 90 seconds for 9.
diesel engine vehicles
Timer Mode Runtime: sets the duration of runtime when the engine is started by the Timer Mode and Smart 10.
Start features
Timer mode Starts: sets the number of times the engine will be started by the Timer Mode and Smart Start 11.
features
Timer mode Intervals: sets the number of hours between engine starts by the Timer Mode and Smart Start 12.
features
Smart Start Low Temperature: sets the low temperature threshold required for Smart Start to start the 13.
engine
Smart Start High Temperature: sets the high temperature threshold required for Smart Start to start the 14.
engine
Smart Start Low battery (Volts): sets the low battery level threshold required for Smart Start to start the 15.
engine
Starter Release Fine Tune: adds or subtracts crank time in Tachometer mode in order to overcome engine 16.
types that short crank or over-crank on the first start attempt
Feature Programming: locks and unlocks the user’s ability to enter the feature menus and manually 17.
change the main unit programming using the Control Center
Transmitter Programming: locks and unlocks the user’s ability to enter the remote control/Reset menu and 18.
manually change any functions using the Control Center
Remote Start Runtime: sets the duration of runtime when the engine is started by remote command19.
VirtualTach Fine tune: adds or subtracts crank time in VirtualTach mode in order to overcome engine types 20.
that short crank or over-crank on the first start attempt
To Next Page
Loading...
Need help?
General
