EasyManua.ls Logo

Directed Ryze Flex - Exercise Menu and Route Tracking; Enabling Route Tracking for an Exercise Session

Directed Ryze Flex
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
To do this, follow the below steps:
Verify that the smartphone’s Bluetooth is turned ON.
Go to the ‘Device menu in the App and verify that your
watch is connected. If not, tap onAll devices and connect
your Watch or complete the pairing process.
In the ‘Home menu, tap the middle of your smartphone
screen and swipe (scroll) down the screen until you see
the message ‘Pull Down To Synchronise Data’ appear
along the top end of the screen. Then, lift your finger to
synchronise data saved on the watch to the App.
In the ‘Home menu, tap on each Card to reveal and review
its historical data in daily, weekly, monthly and yearly
formats as well as additional commentary and information
associated with the respective card.
10.2 EXERCISE MENU AND ROUTE TRACKING
The ‘Exercise menu in the App is the main dashboard where
you can:
Initiate an exercise session for route tracking.
Configure the settings on your smartphone for proper sport
recording.
Set up your exercise training goal, heart rate alert and
distance.
Edit the sport list that appears on the ‘Exercise menu.
10.2.1 ENABLING ROUTE TRACKING FOR AN EXERCISE
SESSION
The App currently supports route tracking for exercises
including:
Outdoor Running | Outdoor Walking | Outdoor
Cycling | Hiking | Indoor Running | Indoor Walking.
For proper sport tracking, the Ryze Connect App must
be granted access to your Android smartphones GPS
location and be given permission for auto-launch via
the setting for ‘Set Sport Permission.’
To enable route tracking by the App, follow the below
steps:
In the ‘Exercise menu, tap the setting icon '
' on the
upper right.
Tap on 'Set Sports Permission' (Android phones only).
Tap on Quick Settings or follow the prompts, scroll
down the screen and slide the button next to ‘Ryze
Connect,’ to the ON position.
Turn ON your smartphones GPS and grant the
location / GPS permissions to the Ryze Connect App
to achieve full functionality.
NOTE: Keep your watch Bluetooth connected to the App
and close to your smartphone during the exercise
session for route tracking.

Table of Contents