Directed Ryze Flex - More App-Controlled Watch Features; Setting Up a Walk-Around Reminder on Your Watch; Setting Up a Menstrual Cycle Tracker; Enabling Incoming Call Alert on Your Watch

17
10.3.8 SETTING UP A WALK-AROUND REMINDER ON YOUR
WATCH
In the ‘Device’ menu, tap on
‘Health’. Tap on ‘Walk-Around
Reminder.’ Follow prompt
instructions to complete the
settings for the reminder. Tap
on ‘
’ in the upper right to
confirm.
10.3.9 SETTING UP A MENSTRUAL CYCLE TRACKER
In the ‘Device’ menu, tap on ‘Health.’
Tap on ‘Menstrual Cycle.’ Follow prompt
instructions to complete the settings for
the reminder. Tap on ‘
’ in the upper right
to confirm.
10.3.10 ENABLING INCOMING CALL ALERT ON YOUR WATCH
With the feature enabled, the Ryze Flex Smart Watch
will receive a notification of incoming call on your
smartphone when the watch stays Bluetooth connected
with the running App. To enable this function, follow the
steps below.
In the ‘Device’ menu, tap on ‘Call Alert.’
In the sub menu, slide the button next to
‘Call Reminder’ to toggle the reminder
ON or OFF. Follow prompt instructions to
complete the setting.
Incoming call alert is disabled when the
‘Do Not Disturb’ mode is enabled.
NOTE: This setting only allows for incoming call alert
and call reject, it does not allow you to make and
receive calls via the watch.
10.3.11 ENABLING DO NOT DISTURB MODE ON YOUR WATCH
The Do Not Disturb function can be used to disable
message and incoming call alert notifications.
To enable this feature, follow the steps below.
• In the ‘Device’ menu, tap on ‘More settings.’ Tap on
‘Do Not Disturb Mode (DND).’
• Slide the button in the sub-menu to toggle the DND
mode ON or OFF. Follow the prompts to complete the
setting. Tap on ‘
’ in the upper right to confirm.
10.3.12 ENABLING INTELLIGENT SPORT DETECTION FEATURE
ON YOUR WATCH
When the sport detection AI is enabled, the watch will
automatically detect a if you are running or walking. To
enable this feature, follow the steps on the next page.