DIRECTV USER GUIDE - HD & SD STANDARD RECEIVERS
116
To verify you are connected:
Press MENU on your DIRECTV Remote
Select Parental, Fav’s & Setup
Select System Setup
Select Network Setup
Choose Connect Now
Select Continue after successfully connecting to DIRECTV via the Internet
(See figure A).
Select Done to complete the setup process (See figure B).
If your DIRECTV Receiver does not immediately recognize the network
connection, you will get the option to choose the connection method. Choose
Wired (See Figure C). Follow the onscreen instructions.
Figure A
Figure B
Figure C
Appendix 2: How to Network Your HD Receiver
Step 2 - Verify that you are connected
To Next Page
Loading...
