Dirna DINAMIC 1.1 bycool - Assembly Recommendations

18
dirna, s.a.
DINAMIC 1.1
EN

RECOMMENDATIONS
      -







Tools










Drill
Broach Ø6



Scissors
Riveter M6
WARNINGS:
-

 dirna, s.a.      -
-
-


        
introduced in the circuit: 300 g.
warranty procedure included
in 


-
ments must be handed over to the user: -
deWarranty and 






Driving torques (N.m)
Fillet
Steel Quality
Wrench
opening
8.8 10.9
M6/100 10 13 10
Hoses assembly
Driving torques (N.m)
Hose size
Fitting
Driving
Torque
Tool
1/4” 13-15 Wrench 14mm.
3/8” 15-17 Wrench 19mm.
Indications concerning position are:
RIGHT: Passenger side
LEFT: Driver side