Page 11
DISH 500 with DISH Pro Twin LNBF, Another
Dish with DISH Pro LNBF or DISH Network
Bandstacked FSS or DBS LNBF, and a DP34
Switch
Connect both ports (connections) of the DISH Pro Twin LNBF to
any two ports on the DP34 Switch that are marked
TO DISH.
Connect the DISH Pro LNBF to any port of the DP34 marked
TO
D
ISH. Make sure there is no more than 200 feet of cable between the
receiver and either LNBF.
To Next Page
Loading...
