Dish Network Hopper with Sling Setup

A
STEP 1: Unpair Your Remote
If you are unable to turn on your original receiver, go to step 2.
A
Open the front panel on your
original receiver. Press the
SYSTEM INFO buon.
B
Locate your remote from the list
on the right side of the screen.
Then, use your remote control to
highlight the “Unpair” opon and
press the SELECT buon.
QUICK TIP
You will not be able to use your
remote with your replacement
receiver unl you unpair it from
your original receiver.
2

Dish Network Hopper with Sling Specifications

General

Brand	Dish Network
Model	Hopper with Sling
Category	DVR
Language	English