Dish Network Hopper Setup Guide

1.
Labeling Your Cables (Cont’d)
c.
For your audio/video connection,
you will either use an HDMI cable,
YPbPr cables, or RCA cables. Attach
either the black label to the cable
connected to the“HDMI” port, the
orange label to the cables connected
to the RCA ports, or the red label to
the cables connected to the YPbPr
ports.
d.
Attach the yellow label to the cable
connected to the "Ethernet" port.
You may not have this cable.
e.
Attach the white label to the cable
connected to the "Phone" port.
You may not have this cable.
YPbPr
COMPONENT
YPbPr
COMPONENT
RCA
COMPOSITE
RCA
COMPOSITE
PHONEPHONE

Dish Network Hopper Specifications

General

Storage Capacity	2TB
Tuners	16
4K Support	Yes
Whole-Home DVR	Yes
Commercial Skip	Yes (AutoHop)
Video Output	HDMI
Audio Output	HDMI, Optical
Connectivity	Ethernet, Wi-Fi
Output Resolution	1080p, 720p
Supported Apps	Netflix, YouTube, Pandora