What to do if the temperature differential between water-in and water-out is too large in my Distinction Heat Pump?
If the temperature difference between the water entering and exiting your Distinction Heat Pump is too large, it may be due to insufficient water flow or low water pressure difference. You should check the water flow volume and inspect the system for any obstructions.
What to do if my Distinction Heat Pump shows an ambient sensor failure?
If your Distinction Heat Pump displays an ambient sensor failure, it's likely because the sensor has an open or short circuit. To resolve this, check or replace the sensor.
What to do if my Distinction Heat Pump indicates a coil sensor failure?
If your Distinction Heat Pump is showing a coil sensor failure, the cause might be an open or short circuit in the sensor. You should check or change the sensor to fix this.
What to do if my Distinction PASRW045 displays a water outlet temp. sensor failure?
If your Distinction Heat Pump reports a water outlet temperature sensor failure, it could be caused by an open or short circuit in the sensor. The suggested solution is to check or change the sensor.
What to do if my Distinction PASRW045 Heat Pump shows a water inlet temp. sensor failure?
If your Distinction Heat Pump is experiencing a water inlet temperature sensor failure, it is probably because the sensor has an open or short circuit. You can try checking or changing the sensor to fix the problem.
Diagram showing the system connection for the heat pump.
Guidelines for choosing an optimal installation site for the unit.
Instructions for connecting the heat pump to the pool's plumbing system.
Details on the electrical hookup and safety precautions for the unit.
Step-by-step procedure for the first operation of the heat pump.
Explains the controller's display, buttons, and indicator lights.
General| Brand | Distinction |
|---|---|
| Model | PASRW045 |
| Category | Heat Pump |
| Language | English |
To Next Page
