Service - 112 420sx Operator’s Manual
50 Hour
Plow
Change Plow Vibrator Oil (Initial)
Change plow vibrator oil for the first time at 50 hours and every 500 hours thereafter.
To change:
1. Open fill (1) to vent vibrator.
2. Drain oil at drain plug (3).
3. Replace plug and move plow vibrator to horizontal position, with vibrator level and skid shoes on
ground. Remove plow blade and sod cutter if necessary.
4. Add MPL at fill (1) until cold oil is halfway up sight glass (2).
IMPORTANT: Do not drain oil from plow vibrator when hot. Let vibrator cool before removing drain plug.
To Next Page
