Drill - 78 420sx Operator’s Manual
CMW
Turning shaft will kill you or crush arm or leg. Stay away.
NOTICE: Keep everybody at least 10’ (3 m) away from drill pipe during operation. Do not straddle
trench or drill pipe while drilling.
Jobsite hazards could cause death or serious injury. Use
correct equipment and work methods. Use and maintain proper safety
equipment.
NOTICE: Set up warning barriers and keep people away from equipment and jobsite while drilling.
Incorrect procedures could result in death, injury, or property damage.
Learn to use equipment correctly.
Improper control function could cause death or serious injury. If control
does not work as described in instructions, stop machine and have it serviced.
NOTICE: Do not tape or tie down switch.
To Next Page
Loading...
