Specifications - 56 FM13V/FM13X Operator’s Manual
Performance U.S. Metric
Centrifugal pump suction port diameter 3 in 76 mm
Centrifugal pump discharge port diameter 3 in 76 mm
Maximum fluid pressure 50 psi 3.4 bar
Maximum pump discharge rate (water) 270 gpm 1020 L/min
Maximum flow rate to drilling unit (42 viscosity fluid @ 30 psi/2.1 bar
through 3”/76mm X 50’/15 m hose)
0-220 gpm 0-832 L/min
Drilling fluid tank capacity (nominal, each tank) 500/950 gal 1890/3596L
Solids addition rate with metering plate 30 lb/min 14 kg/min
Solids addition rate without metering plate 75 lb/min 34 kg/min
Dry mixing hopper capacity
1 ft
3
28 L
Typical tank mixing time 7-10 min
Engine U.S. Metric
Honda GX390, gasoline
Cooling medium air
Number of cylinders 1
Displacement
23.7 in
3
0.389 L
Bore 3.46 in 88 mm
Stroke 2.52 in 64 mm
Manufacturer’s net power rating (per SAE J1349) 11.7 hp 8.7 kW
Rated speed 3600 rpm 3600 rpm
Emissions compliance EPA Phase 3 EU Stage II
To Next Page
Loading...
