Service - 48 FM25/FM25X Operator’s Manual
Service Precautions
Service Precautions
Welding Precaution
Washing Precaution
Misuse of machine can cause death or serious injury.
Read and understand operator’s manual and all other safety instructions
before use.
To help avoid injury:
• Unless otherwise instructed, all service should be performed with engine off and engine cool.
• Refer to engine manufacturer’s manual for engine maintenance instructions.
• Wear personal protective equipment.
NOTICE: Welding can damage electronics.
• Welding currents can damage electronic components. Connect welder ground close to welding
point and make sure no electronic components are in the ground path.
• Disconnect battery at battery disconnect switch before welding to prevent damage to battery.
• Do not turn off battery disconnect switch with engine running, or alternator and other electronic
devices may be damaged.
NOTICE: Water can damage electronics. When cleaning equipment, do not spray electrical components
with water.
To Next Page
Loading...