Ditch Witch FM25 - Engine Oil Temperature Chart; Approved Coolant

To Next Page

To Previous Page

Service - 50 FM25/FM25X Operator’s Manual

Recommended Lubricants/Service Key

Engine Oil Temperature Chart

Approved Coolant

This unit was filled with Fleetguard

ES Compleat™ coolant (blue in color) before shipment from factory.

This coolant is available, pre-diluted, from your Ditch Witch

dealer as part number 255-1055. Add or

replace with heavy duty diesel engine coolant meeting ASTM D6210.

NOTICE:

• Use only pre-diluted coolant or concentrated coolant mixed with distilled water. Do not use tap

water.

• Do not use water or high-silicate automotive-type coolant. This will lead to engine damage or

premature engine failure.

• Do not mix heavy-duty diesel engine coolant and automotive-type coolant. This will lead to coolant

breakdown and engine damage.

Temperature range anticipated before next oil change