Ditch Witch FX30 - Page 36

36 FX30 - CONTROLS
MACHINE CONTROL DESCRIPTIONS
36 FX30 - CONTROLS
MACHINE CONTROL DESCRIPTIONS
Tank Door Handle (500 and 800
only)
This handle opens or closes
vacuum tank door.
• Turn counterclockwise to
loosen.
• Turn clockwise approximately
9-11 turns to tighten.
Tank Door Handle (1200 only)
This handle engages or
disengages tank door after tank
door lock is unlocked.
• Turn 90° counterclockwise and
pull to DISENGAGE.
• Push and turn 90° clockwise to
ENGAGE.
IMPORTANT: Door handle must
be horizontal to push/pull door handle.
Tank Door Lock (1200 only)
This handle locks vaccum tank
door.
• Turn counterclockwise to
unlock.
• Turn clockwise until it stops to
lock.
D
I
S
E
N
G
A
G
E
E
N
G
A
G
E
om0646h.eps
D
I
S
E
N
G
A
G
E
E
N
G
A
G
E
om0645h.eps
Tank Door Handle (500 and 800
only)
This handle opens or closes
vacuum tank door.
• Turn counterclockwise to
loosen.
• Turn clockwise approximately
9-11 turns to tighten.
Tank Door Handle (1200 only)
This handle engages or
disengages tank door after tank
door lock is unlocked.
• Turn 90° counterclockwise and
pull to DISENGAGE.
• Push and turn 90° clockwise to
ENGAGE.
IMPORTANT: Door handle must
be horizontal to push/pull door handle.
Tank Door Lock (1200 only)
This handle locks vaccum tank
door.
• Turn counterclockwise to
unlock.
• Turn clockwise until it stops to
lock.
D
I
S
E
N
G
A
G
E
E
N
G
A
G
E
om0646h.eps
D
I
S
E
N
G
A
G
E
E
N
G
A
G
E
om0645h.eps