Ditch Witch FX30 - Antifreeze the System

76 FX30 - OPERATION
ANTIFREEZE THE SYSTEM
76 FX30 - OPERATION
ANTIFREEZE THE SYSTEM
ANTIFREEZE THE SYSTEM
Follow these steps for overnight or long-term storage of unit
during cold weather.
1. Fill antifreeze tank with a propylene-glycol based antifreeze.
2. Ensure that water tank valve is closed.
3. Open antifreeze tank valve.
4. Connect water pressure hose to water lance.
5. Start engine.
6. Move water pressure switch to on.
7. Squeeze water lance handle and run until antifreeze runs
through the water lance.
8. Move water pressure switch to off.
9. Close antifreeze tank supply valve.
10. Turn ignition switch to off.
11. Drain water tank completely.
ANTIFREEZE THE SYSTEM
Follow these steps for overnight or long-term storage of unit
during cold weather.
1. Fill antifreeze tank with a propylene-glycol based antifreeze.
2. Ensure that water tank valve is closed.
3. Open antifreeze tank valve.
4. Connect water pressure hose to water lance.
5. Start engine.
6. Move water pressure switch to on.
7. Squeeze water lance handle and run until antifreeze runs
through the water lance.
8. Move water pressure switch to off.
9. Close antifreeze tank supply valve.
10. Turn ignition switch to off.
11. Drain water tank completely.