FX30 - OPERATION 75
DRAIN TANK
FX30 - OPERATION 75
DRAIN TANK
15. If necessary, close tank door.
If using 500 or 800:
• Start engine. This will pull a vacuum and cause door to pull
toward tank.
• Turn door handle clockwise 9-11 turns to tighten door
against seal.
If using 1200:
• Fully open door to disengage door lift latch (1) from pin (2).
Latch cover (3) must be down for tank door to close.
• Pull door lift control to CLOSE.
• Turn door handle to DISENGAGE, push in and turn to
ENGAGE.
• Push door seal control to SEAL.
• Turn tank door lock clockwise until it stops to lock.
• Pull door seal control to RELEASE
om0664h.eps
1
2
3
15. If necessary, close tank door.
If using 500 or 800:
• Start engine. This will pull a vacuum and cause door to pull
toward tank.
• Turn door handle clockwise 9-11 turns to tighten door
against seal.
If using 1200:
• Fully open door to disengage door lift latch (1) from pin (2).
Latch cover (3) must be down for tank door to close.
• Pull door lift control to CLOSE.
• Turn door handle to DISENGAGE, push in and turn to
ENGAGE.
• Push door seal control to SEAL.
• Turn tank door lock clockwise until it stops to lock.
• Pull door seal control to RELEASE
om0664h.eps
1
2
3