Ditch Witch FX30 - Vacuum and Pothole

FX30 - OPERATION 65
VACUUM
FX30 - OPERATION 65
VACUUM
VACUUM
1. Ensure that unit is hitched to vehicle or properly stabilized.
Block the wheels.
2. Remove vacuum hoses from storage.
If using 1200:
• Disconnect hose end from
hose catch.
• Insert hose through rollers
(2).
• Pull vacuum hose reel
control (1) down to unwind
hose.
• Disconnect hose end (3)
from hose reel.
3. Connect hoses. Secure locking clamps on inlet valve.
IMPORTANT: Inlet valve can be open or closed before
starting engine. If valve is closed, vacuum will build faster.
4. Ensure that drain valve is closed.
5. Position vacuum hose in area to be excavated.
om0658h.eps
1
2
3
VACUUM
1. Ensure that unit is hitched to vehicle or properly stabilized.
Block the wheels.
2. Remove vacuum hoses from storage.
If using 1200:
• Disconnect hose end from
hose catch.
• Insert hose through rollers
(2).
• Pull vacuum hose reel
control (1) down to unwind
hose.
• Disconnect hose end (3)
from hose reel.
3. Connect hoses. Secure locking clamps on inlet valve.
IMPORTANT: Inlet valve can be open or closed before
starting engine. If valve is closed, vacuum will build faster.
4. Ensure that drain valve is closed.
5. Position vacuum hose in area to be excavated.
om0658h.eps
1
2
3