Ditch Witch FX30 - Page 98

FX30 - MAINTENANCE 98
ENGINE
FX30 - MAINTENANCE 98
ENGINE
Cooling System
Check
Check coolant level in overflow
tank (5) every 10 hours. Coolant
should be between LOW and FULL
marks on tank.
Fill as needed with Ditch Witch
approved coolant (p/n 255-006), or
other fully formulated ethylene-
glycol-based heavy duty engine
coolant meeting ASTM
specification D6210, TMC RP329,
or John Deere specification JDM H24A2. Do not fill over FULL
mark on tank.
Check clamps and hoses for looseness or wear. Tighten loose
clamps. Replace swollen, hardened, or cracked hoses.
om2461a.eps
5
Cooling System
Check
Check coolant level in overflow
tank (5) every 10 hours. Coolant
should be between LOW and FULL
marks on tank.
Fill as needed with Ditch Witch
approved coolant (p/n 255-006), or
other fully formulated ethylene-
glycol-based heavy duty engine
coolant meeting ASTM
specification D6210, TMC RP329,
or John Deere specification JDM H24A2. Do not fill over FULL
mark on tank.
Check clamps and hoses for looseness or wear. Tighten loose
clamps. Replace swollen, hardened, or cracked hoses.
om2461a.eps
5