Ditch Witch JT1220 Mach 1 - Set-Up Console

Controls - 20 JT1220 Mach 1 Operator’s Manual
Set-Up Console
CMW
Set-Up Console
1. Tracker control key
2. Ignition switch
3. Left track switch
4. Right track switch
5. Right stabilizer control
6. Frame tilt control
7. Left stabilizer control
Item Description Notes
1. Tracker control key To allow tracker operator to
stop thrust and rotation, move
key to enable position (up).
To override tracker control
mode, move key to disable
position (right).
IMPORTANT: Remove key and keep
in tracker operator’s possession.