Ditch Witch JT1220 Mach 1 - Conduct a Bore

Transport - 86 JT1220 Mach 1 Operator’s Manual
Tow
CMW
To open selector valves for towing, loosen jam nut and tighten valve screw (shown) until it is fully
threaded.
To close selector valves and return to normal operation, unthread valve screw and tighten jam nut.
To attach chains to tow points, determine which points are facing towing vehicle.
If back tow points are facing towing vehicle, loop chains through each tow point and bring them together to
a central pull point.
If front tow points are facing towing vehicle, loop chain through tow point and pull straight forward.