14 JT920/JT920L - CONTROLS
SETUP CONSOLE OVERVIEW
14 JT920/JT920L - CONTROLS
SETUP CONSOLE OVERVIEW
Autobore Select Switch
This switch selects between
autobore and manual modes.
• Press top for autobore control.
• Press bottom for manual
control.
Ignition Switch
This switch has three positions.
• Insert key and turn all the way
clockwise to start engine.
• Release when engine starts.
• Key will return to on position.
Cold Start Switch
This optional switch helps start
cold engine.
• Turn key to on position.
• Press top of switch for 10-20
seconds.
• Start engine.
Autobore Select Switch
This switch selects between
autobore and manual modes.
• Press top for autobore control.
• Press bottom for manual
control.
Ignition Switch
This switch has three positions.
• Insert key and turn all the way
clockwise to start engine.
• Release when engine starts.
• Key will return to on position.
Cold Start Switch
This optional switch helps start
cold engine.
• Turn key to on position.
• Press top of switch for 10-20
seconds.
• Start engine.
To Next Page
Loading...
