Ditch Witch JT920L - Page 19

JT920/JT920L - CONTROLS 19
DRILL OVERVIEW
JT920/JT920L - CONTROLS 19
DRILL OVERVIEW
Throttle Switch
This switch controls remote fluid
unit engine speed.
• Press top to run engine at
maximum speed.
• Press bottom to run engine at
idle speed.
This switch only works when fluid
unit throttle switch is in idle
position.
Wrench Control
This lever controls front wrench
(near pipe guide) and back wrench
(at spindle).
Pull or push lever to control back
wrench.
• Pull to release pipe.
• Push to lock onto pipe flats.
Move lever to right or left to control
front wrench.
• Move right to lock onto pipe flats.
• Move left to release pipe.
ic0050c.eps
ic1057c.eps
Throttle Switch
This switch controls remote fluid
unit engine speed.
• Press top to run engine at
maximum speed.
• Press bottom to run engine at
idle speed.
This switch only works when fluid
unit throttle switch is in idle
position.
Wrench Control
This lever controls front wrench
(near pipe guide) and back wrench
(at spindle).
Pull or push lever to control back
wrench.
• Pull to release pipe.
• Push to lock onto pipe flats.
Move lever to right or left to control
front wrench.
• Move right to lock onto pipe flats.
• Move left to release pipe.
ic0050c.eps
ic1057c.eps