JT920/JT920L - TRANSPORTATION 71
HAUL
JT920/JT920L - TRANSPORTATION 71
HAUL
HAUL
Crushing weight. If load falls or
moves it could kill or crush you. Use proper
procedures and equipment or stay away.
NOTICES:
• Load and unload trailer on level ground.
• Incorrect loading can cause trailer swaying.
• Attach trailer to vehicle before loading or unloading.
Loading onto Trailer
1. Fasten trailer to truck.
2. Check that trailer tire pressure is at recommended level.
3. Move drilling unit to rear of trailer and align with ramps or
center of trailer bed.
4. Slowly drive unit onto trailer.
5. Lower stabilizers to trailer floor.
6. Stop engine when unit is safely positioned on trailer bed.
7. Attach tiedowns to drilling unit where tiedown decals are
located.
HAUL
Crushing weight. If load falls or
moves it could kill or crush you. Use proper
procedures and equipment or stay away.
NOTICES:
• Load and unload trailer on level ground.
• Incorrect loading can cause trailer swaying.
• Attach trailer to vehicle before loading or unloading.
Loading onto Trailer
1. Fasten trailer to truck.
2. Check that trailer tire pressure is at recommended level.
3. Move drilling unit to rear of trailer and align with ramps or
center of trailer bed.
4. Slowly drive unit onto trailer.
5. Lower stabilizers to trailer floor.
6. Stop engine when unit is safely positioned on trailer bed.
7. Attach tiedowns to drilling unit where tiedown decals are
located.
To Next Page
Loading...
