JT920/JT920L - TRANSPORTATION 73
TOW
JT920/JT920L - TRANSPORTATION 73
TOW
TOW
Under normal conditions, drilling unit should not be towed. If unit
breaks down and towing is necessary:
• Tow for short distances at less than 1 mph (1.6 kph).
• Attach chains to indicated tow points facing towing
vehicle.
• Use maximum towing force of 1.5 times unit weight.
• Disengage power to tracks.
IMPORTANT: When hydraulics are disengaged, unit has no
brakes.
TOW
Under normal conditions, drilling unit should not be towed. If unit
breaks down and towing is necessary:
• Tow for short distances at less than 1 mph (1.6 kph).
• Attach chains to indicated tow points facing towing
vehicle.
• Use maximum towing force of 1.5 times unit weight.
• Disengage power to tracks.
IMPORTANT: When hydraulics are disengaged, unit has no
brakes.
To Next Page
Loading...
