DITEC NEOS User Manual (English)

Other manuals for DITEC NEOS

Questions and Answers:

J
Jeffrey GrayJul 29, 2025
What to do if my DITEC Fencing & Gates gate doesn’t open or close?
- N
  norrisamandaJul 30, 2025
  If your DITEC Fencing & Gates gate isn’t opening or closing, several issues could be the cause. It might be due to no power, short-circuited accessories, a blown line fuse, an open release door microswitch (check the key position and ensure the release door is closed), a mechanical fault, a faulty motor, or a faulty control panel. It is best to contact Technical Service to resolve these issues.
H
Holly ScottAug 4, 2025
Why is the flashing light not working on my DITEC Fencing & Gates?
- D
  Dawn RodriguezAug 5, 2025
  If the flashing light on your DITEC Fencing & Gates system isn't working, the lamp may have blown and need replacement. Alternatively, the wires could be damaged, detached, or short-circuited. In this case, contact Technical Service to resolve these issues.
N
Nicholas GibsonAug 10, 2025
Why does my DITEC Fencing & Gates remote control have limited range?
- C
  Cheyenne ZhangAug 10, 2025
  If your DITEC Fencing & Gates remote control has a limited range, especially while the gate is moving, the batteries are likely running low. Try replacing them.
D
Darlene AndersonAug 17, 2025
What to do if the «gate open» indicator light doesn’t work on my DITEC Fencing & Gates?
- A
  Adam CaldwellAug 17, 2025
  If the «gate open» indicator light on your DITEC Fencing & Gates system isn't working, the lamp may have blown and needs to be replaced. It could also be that the wires are damaged, detached, or short-circuited. In this case, contact Technical Service to resolve these issues.
S
savagekimAug 22, 2025
Why does my DITEC Fencing & Gates gate open/close a short way, and then stop?
- K
  Kyle MathisAug 22, 2025
  If your DITEC Fencing & Gates gate opens or closes a short distance and then stops, friction may be present. It is best to contact Technical Service to resolve these issues.