Need help?Do you have a question about the DITEC CUBIC6 and is the answer not in the manual?
General| Model | CUBIC6 |
|---|---|
| Category | Fencing & Gates |
| Max. Leaf Weight | 600 kg |
| Max. Leaf Length | 3.5 m |
| Operating Temperature | -20°C to +55°C |
| Material | Aluminum |
| Power Supply | 230V AC |
Details installer obligations under the Machinery Directive (2006/42/EC) for gate automation.
Explains service classes (Frequent/Intensive) and performance considerations for gate automation.
Verifies structure, lubrication, and opening/closing stops before installation.
Instructions for installing the foundation case and drainage system for the gearmotor.
Guidance on choosing and installing the lever mechanisms as per manual.
Instructions for installing door release mechanisms, advising gate positioning.
Details on installing the gear motor after foundation and mechanisms, emphasizing cleaning.
Steps for installing the motor with CUBIC6L/CUBIC6LG models, including lever and stop adjustment.
Instructions for installing with CUBIC6TC, involving pinion and chain connection.
Guidance on installing magnetic limit switches for CUBIC6FM to limit wing travel.
Essential safety advice for users regarding gate operation, supervision, and emergency procedures.
Guidelines for proper disposal of electrical equipment and batteries at designated recycling centers.
To Next Page
