4
IP2160EN
We,
ASSA ABLOY Entrance Systems AB
Lodjursgatan 10
SE-261 44 Landskrona
Sweden
declare, under our sole responsibility, that the type of equipment with the name:
Ditec NES400EH, NES600EH, NES1000EHSF Automation for sliding gates (CS12E)
Ditec NES400EHP, NES600EHP, NES1000EHP Automation for sliding gates (CS12M)
complies with the following directives and their amendments:
2006/42/EC Machinery Directive (MD), regarding the following essential health and safety require-
ments: 1.1.2, 1.1.3, 1.2.1, 1.2.2, 1.2.3, 1.2.4.2, 1.2.6, 1.3.9, 1.4.3, 1.7.2, 1.7.3, 1.7.4, 1.7.4.1,
1.7.4.2.
2014/30/EU Electromagnetic Compatibility Directive (EMCD)
2014/53/EU RED Directive;
2011/65/EU Restriction of Hazardous Substances (RoHS 2)
2015/863/EU Restriction of Hazardous Substances (RoHS Amendment 2)
Harmonised European standards which have been applied:
EN 61000-6-3:2007 + A1:2011 + AC:2012 EN 61000-6-2:2019
EN 55014-1:2006 + A1:2009 + A2:2011 EN 55014-2:2015
EN 60335-1:2012 + A11:2014 + A13:2017 + A14:2019 + A15:2021
EN 60335-2-103:2015
EN ISO 13849-1:2015 EN 62233:2008
ETSI EN 300 220-2 V3.2.1 ETSI EN 300 220-1 V3.1.1
ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-3 V2.1.1
Other standards or technical specifications which have been applied:
EN 12453:2017
The manufacturing process guarantees that the equipment complies with the technical docu-
mentation.
Responsible for the technical documentation:
Matteo Fino
Ditec S.p.A.
Largo U. Boccioni, 1
21040 Origgio (VA)
Italy
Signed on behalf of ASSA ABLOY Entrance Systems AB by:
Place Date Signature Position
Origgio 2023-06-07 Matteo Fino CEO Ditec
Declaration of incorporation of partly completed machinery
(Directive 2006/42/EC, Annex II-B)
© ASSA ABLOY, All rights reserved
To Next Page
Loading...
