DITEC NEOS - Declaration of Conformity

5
IP2160EN © ASSA ABLOY, All rights reserved
UK Declaration of Conformity
We:
ASSA ABLOY Entrance Systems AB
Lodjursgatan 10
SE-261 44 Landskrona
Sweden
Declare under our sole responsibility that the types of equipment with names:
Ditec NES400EH, NES600EH, NES1000EHSF Automation for sliding gates (CS12E)
Ditec NES400EHP, NES600EHP, NES1000EHP Automation for sliding gates (CS12M)
complies with the following directives and their amendments:
• Supply of Machinery (Safety) Regulations 2016
• Electromagnetic Compatibility Regulations 2016
• Radio Equipment Regulations 2017
• The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012 (RoHS)
Harmonized European standards that have been applied:
EN 61000-6-3:2007 + A1:2011 + AC:2012 EN 61000-6-2:2019
EN 55014-1:2006 + A1:2009 + A2:2011 EN 55014-2:2015
EN 60335-1:2012 + A11:2014 + A13:2017 + A14:2019 + A15:2021
EN 60335-2-103:2015
EN ISO 13849-1:2015 EN 62233:2008
ETSI EN 300 220-2 V3.2.1 ETSI EN 300 220-1 V3.1.1
ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-3 V2.1.1
Other standards or technical specifications that have been applied:
EN 12453:20175
The manufacturing process ensures the compliance of the equipment with the technical file.
Responsible for technical file:
Matteo Fino
Ditec S.p.A.
Largo U. Boccioni, 1
21040 Origgio (VA)
Italy
Signed for and on behalf of ASSA ABLOY Entrance Systems AB by:
Place Date Signature Position
Origgio 2023-06-07 Matteo Fino CEO Ditec