Displays of series DT-203NN, DT-105NN and DT-110NN
1 INTRODUCTION
The alphanumerical displays series DT-203NN, DT-105NN and DT-110NN, are industrial
displays controled by Profinet network.
One of its main characteristics is the height of the characters:
DT-203NN: 30mm, readable from up to 15m.
DT-105NN: 50mm, readable from up to 25m.
DT-110NN: 100mm, readable from up to 50m
As with other display series, the DT-NN is available in one or two-sided versions, which
provides multiple solutions and installation possibilities.
It can be surface mounted or suspended using the side anchoring.
The application field of these displays is very wide in all types of industrial applications
using the advantages of the Profinet network. They can be used to display Scada program
values, counter values from a PLC, warning messages, advertisements….
Fig. 1 Profinet comunication
To Next Page
Loading...
General