Introduction
4 NiTek Duo Dive Computer User Manual
atmospheres for mix1 and 1.6 atmospheres for mix2, and
when cumulative exposure to elevated PO2s exceeds
recommended limits.
• The NiTek Duo can calculate decompression stop
requirements for stops as deep as 90 feet (27 meters)
• The NiTek Duo can be programmed to display data in
Imperial or metric units
• Dive depth can be displayed in fresh or salt water
equivalents
• Special mode indicators make it easy to determine what
display mode or screen you are in at any time
• The NiTek Duo has a back light to illuminate the screen,
which can be turned on with the touch of a button
• The NiTek Duo’s memory capability enables it to hold and
display log data on up to 30 hours of dive time or 60 dives
• Detailed dive-profile information can be stored for each dive
through user-programmable sample intervals of 15 or 30
seconds (longer intervals allow data for a greater number of
dives)
• Dive data can be uploaded and stored in a dive log format on
a desktop or laptop computer using the NiTekLogic™
software and optional PC interface
To Next Page
Loading...
