密着させる
■
How to Attach the Housing
[Align the positioning ring with the main body of the Ring Light]
①
Loosen the positioning bolts (x 4) on the main body of the Ring
Light using the provided Allen wrench. Line up the positioning
ring with the main body of the Ring Light. The positioning bolts
are very small; be careful when handling them so you don’t
lose them. When transporting the Ring Light, always take the
provided spare bolts (x 4) with you
Positioning Bolts
(x 4)
Align the
positioning ring
Positioning ring
54
To Next Page
Loading...