DiveExtreme DL2001 - Attachment to and Removal from the Housing

Position Correction Mechanism (patent pending)
Position Correction Mechanism: With the previous method for
securing the modules (by screwing them onto the Ring Light), it
was not possible to know where the modules would be positioned
when you turned the lock ring all the way to the end. In other words,
it wasn’t possible to fix the Ring Light horizontally on top of the
housing with the modules attached. The new Position Correction
Mechanism features a positioning ring and positioning bolts that
allow you to fix the Ring Light horizontally.
Attachment to and Removal from the Housing
There was no way to know
where the modules would
end when screwing them
onto the ring.
Position Correction
Mechanism for horizontal
xing.
53